|
Bio diesel pump 50 litres per minute
- Robust pumping units for use with diesel fuels.
- Direct drive,self priming, vane pumping units. 1'' BSPF ports.
- On/off switch & 2m mains cable.Integral filter & bypass
- Weatherproof to IP55 for outdoor use.
- Continuously rated motor with thermal cut out.
|
| |
|
Bio Diesel Transfer Pump 80l per minute
- Robust pumping units for use with diesel fuels.
- Direct drive,self priming, vane pumping units. 1'' BSPF ports.
- On/off switch & 2m mains cable.Integral filter & bypass
- Weatherproof to IP55 for outdoor use.
- Continuously rated motor with thermal cut out.
|
| |
|
Bio diesel pump 100 litres per minute
- Robust pumping units for use with diesel fuels.
- Direct drive,self priming, vane pumping units. 1'' BSPF ports.
- On/off switch & 2m mains cable.Integral filter & bypass
- Weatherproof to IP55 for outdoor use.
- Continuously rated motor with thermal cut out.
|
| |
|
12/24V Transfer/Drum/Portable Fuel Pumps
- Ideal for mounting into plant equipment, excavators etc.
- Max flow : 40L/min. 3/4'' BSPF ports. Max run time 30 mins
- Direct drive vane pumping unit with bypass valve.
- Foot mounting plate. Pump is IP54 for outdoor use.
|
| |
|
Battery pump for Biodiesel
- Ideal for transferring clean oils up to SAE 50, water & antifreeze.diesel and BIODIESEL B100
- Max. 14L/min (SAE 30 @ 20 C).
- Gear pump mechanism, self priming to 1.5m.
- Steel carrying case, portable & weatherproof to IP55.
- Pump designed to stall safely, bypass not required.
- Integral on/off switch & inlet filter.
- 1/2'' BSP hose tails.
- 1.5m long battery cable with croc clips.
- Max run time 30 mins.
|
| |
|
12/24V Transfer/Drum/Portable Fuel Pumps
Suitable for pumping diesel/gas oil, fresh & sea water up to 80 C.
- Max. flow rate 18L/min.Length 16.5cm (61/2''), diameter 4cm (11/2'')
- 12v centrifugal submersible pump (Can be installed inline).
- Outlet 12mm (1/2'') diameter hose tail.
- 4m battery cable & clips. Weight 1.1 Kgs.
- Max. working pressure 13 psi (0.9 bar)
- Continuously rated motor with a 500hr life expectancy.
- Do not run dry.
|
| |
|
IBC mount pump kit 40L/min
- Designed to fit most 1000L IBC's.
- Pumping speed 40L/min.
- Meter accuracy +/-2%.
- 3m delivery hose, automatic nozzle & suction assembly.
- Built in nozzle holder.
- Bracket & nozzle can be padlocked.
|
| |
|
230V oil transfer pump. Suitable for all biodiesel blends
20l per minute
- Suitable for all biodiesel blends.
- Max. 20L/min (SAE 30 @ 20 C).
- Eccentric pump unit.
- Integral on/off switch & bypass valve.
- 3/4'' BSPF ports fitted with 1'' hose tails.
- Foot mounting plate.
- Weatherproof to IP55.
- Max. suction lift 1m.
- Continuously rated motor c/w thermal cut out.
|
| |
|
Heavy duty vane pump flameproof motor suitable for flammable liquids.
- Heavy duty vane pump for direct drum or tank mounting.
- UL listed flameproof motor suitable for flammable liquids.
- Max. flow rate 45L/min.
- 2'' BSPM drum adaptor & telescopic suction (0.6m - 1.1m)
- 3m delivery hose, aluminium manual nozzle & holster.
- Heavy duty battery cable.
- On/off switch & bypass valve.
- 30min duty cycle with thermal cut out.
|
| |
|
50l min Wall mounted pump system
- Standard duty, for the small fleet operator.
- Robust self priming vane pumping unit for use with diesel.
- Nozzle can be locked.
- Meter accuracy of +/- 2%. Non resettable totaliser.
- Weatherproof to IP55. Integral filter & bypass valve
- Integral on/off switch. Separate mains wiring junction box.
- C/w 4m delivery hose & automatic nozzle.
- Continuously rated motor with thermal cut out.
- Dimensions : 520mm H x 420mm W x 230mm D.
|
| |
|
Portable 12volt transfer pump Excellent value
* Battery Operated 12v DC
* 38 litres per minute (max.)
* Suitable for diesel, paraffin & light oils only with flash point above +55°C
* Comes complete with 4 metres anti-static fuel delivery hose, aluminium trigger nozzle, 2 metre battery connector cable, bottom filter for riser hose
* Hose can be cut to desired lengths to suit individual inlet & outlet
* Duty cycle 30 minutes max.
* Weight 7.5kg
|
| |

(Click to Enlarge)
|
Lever action Drum Pump
* Lever action
* Die-cast alloy & steel construction
* Brass piston ring
* 0.3 litres per stroke - 14 litres per minute approx.
* Threaded 2" & 1½" BSP
* Telescopic riser tube 457mm to 890mm
* Suitable for all petroleum products.
* Weight 2.5 kg
|
| |

(Click to Enlarge)
|
Methanol Delivery pump
* Polypropylene and fibre mix body components
* Stainless steel piston rod
* Viton seal
* Suitable for light oils, paraffin, diesel, alcohol water, water based chemicals, mild solvents, anti-freeze, weaker acid and alkali solutions etc.
* Yellow pump body
|
| |

(Click to Enlarge)
|
Corrosive solvent rotary pump
specialist rotary pumps
A range of high quality, technical pumps for specialised applications. Features:
l 350cc per revolution/25 litres per minute
l 1"/25mm outlet pipe
l 1.1/2"/2" bsp barrel adaptor
l 3-piece riser tube each 13"/33cm long
l Add one extra length of riser tube for 4ft tanks as an optional extra
l Made from Ryton PPS and 304 Stainless Steel
l Suitable for liquid foodstuffs such as juice, milk, wine, cooking oils, water, vinegar, liquid additives etc.
l Also suitable for a variety of corrosive chemicals, solvents, oils etc.
l Weight 2.6 kg
|
| |
|
Fuel Station
- Standard duty, for the small fleet operator.
- Robust self priming vane pumping unit for use with diesel.
- Choose pumping speed 40L/min.
- Meter accuracy of +/- 2%. Non resettable totaliser.
- Weatherproof to IP55. Integral filter & bypass valve
- Integral on/off switch. Separate mains wiring junction box.
- C/w 4m delivery hose & auto nozzle.
- Continuously rated motor c/w thermal cut out.
- Size 520mm (161/2'') H x 420mm (201/2'') W x 230mm (9'') D.
|
| |
|
Electric drum pump
Electric drum pump, with vacuum hose, pressure hose and suction piston valve, max. amount pumped 40 l, 230 V power supply
|
| |

(Click to Enlarge)
|
Atex methanol pump 18 l per minute
Atex Diaphragm Pump
The Husky™ 205 operates from 20-100 psi (1.8 - 7 bar) and pumps fluids with viscosities of up to 500 cps, and pumpable solids up to 0.06 in. (1.5 mm) in diameter.
Uses include
* Municipal water treatment systems
* Waste water plants
* Ink
* Printed circuit board operations
* Irrigation systems
* Plating/surface finishing
* Car wash chemicals
* Laundry chemicals
* Chemical dosing
Air line/ Compressor needed for operation
|
| |